Once the Check'In Pro 2 is installed, a test is required. Here is the simplest way to perform a break-in test:

Vibration Detection

1  Step outside the secured location and close the door. Wait for one minute (this is the delay during which the Check'In Pro 2's detection is paused).

2  Hit the door with strong knocks (either 5 slow knocks or 15 rapid ones).

3  An audio message will then announce: "Warning, this site is secured, the siren will sound in a few seconds...".

4  Once the audio message is completed, the microphone will record a 15-second audio clip. The siren will then sound for three minutes.

5  Simultaneously, depending on your preferences, you will receive a notification on your smartphone and/or an SMS and/or an email. The alert screen on the Check'In mobile app allows you to turn off the siren.

Here is a video explaining how to trigger an alert:

Motion Detection

1  Close the door of the secured location but stay inside. Ensure that you are in a location where the motion detector cannot see you (for instance, move to another room). 

💡 If you cannot see the motion detector, it means it cannot see you either!

2  Wait for the delay period. By default, the delay is 15 minutes, but it can be adjusted to between 0 and 90 minutes. If you wish to modify it, please contact our customer service.

3  Walk past the Check'In Pro 2.

4  An audio message will then announce: "Warning, this site is secured, the siren will sound in a few seconds...".

5  Once the audio message is completed, the microphone will record a 15-second audio clip. The siren will then sound for three minutes.

6  Simultaneously, depending on your preferences, you will receive a notification on your smartphone and/or an SMS and/or an email. The alert screen on the Check'In mobile app allows you to turn off the siren.