What is the purpose of the Check'In Pro 2 alarm?
The Check'In Pro 2 alarm is a device consisting of a connected Check'In Pro 2 unit and a mobile application: Check'In. Equipped with an embedded artificial intelligence, the Check'In Pro 2 alarm protects the spaces to be secured by detecting suspicious vibrations and movements.
The Check'In Pro 2 unit is autonomous and requires no connection, electricity, or Wi-Fi. It operates 7 days a week and 24 hours a day. It can be installed in the most remote places where the network is weak (e.g., countryside, basement...) and is compatible with all types of doors: flat doors, garage doors...
How does the Check'In Pro 2 alarm work?
The Check'In Pro 2 unit is equipped with a SIM card that relies on LTE-M and NB-IoT networks to communicate with the Artifeel server and the mobile application. It operates 24/7, powered by two CR17500 3V Li-MnO2 batteries with a two-year life span.
The Check'In Pro 2 sensors continuously analyse the vibrations affecting the opening on which the unit is mounted. They use embedded artificial intelligence to differentiate a normal opening from an intrusion attempt. Simultaneously, the Check'In Pro 2 constantly monitors the area in front of it and detects any movement that occurs. Thus, there is no need for activation or deactivation; the surveillance is permanent.
When an intrusion attempt is detected, a pre-recorded voice warns intruders that the site is protected. A 15-second audio clip is then recorded before the alarm sounds for three minutes. At the same time, you are notified of the break-in attempt on your mobile phone (via the Check'In app and/or by SMS and/or by email).
Installing the Check'In Pro 2 alarm
Installing the Check'In Pro 2 alarm takes less than three minutes. Simply download the Check'In app, then follow the on-screen instructions. Next, attach your Check'In Pro 2 unit to the opening of the area to be protected using the two adhesives on the back of the Check'In Pro 2. No connection is required.
You can find all the steps to follow during the installation in the following article:
Technical Specifications of the Check'In Pro 2
- Sensors: Accelerometer, gyroscope, magnetometer
- Motion detector: 130° field of view, 6m range
- Microphone for audio verification
- Connectivity: LTE-M, NB-IoT, and BLE (Bluetooth Low Energy)
- Power supply: 2 x 3V batteries ref LM17500
- Battery life: 2 years
- Built-in siren: 85 dB
- Indoor use
- Dimensions: 140 x 72 x 31 mm
- Weight: 200g with batteries