If you wish to reinstall your Check'In Pro 2 in another location or if it is not functioning correctly, you have the option to reset it to factory settings. The steps below will guide you on how to proceed:
1 Ensure that the Check'In Pro 2's batteries are inserted.
2 Press the button located on the right side of the Check'In Pro 2 for about 9 seconds, until the LED lights up red.
3 Once you release your finger from the button, you will hear a beep, indicating that the reset was successful and that the Check'In Pro 2 will restart.
💡 If you intend to remove the Check'In Pro 2's batteries, first check that the LED is no longer flashing red. If you remove the batteries too early, the Check'In Pro 2 will not reset correctly and you will need to repeat steps 1, 2, and 3.
💡 If you wish to continue using your Check'In Pro 2, note that it will no longer be functional after resetting. Therefore, perform a double press after it restarts to reactivate it. You will then hear an activation melody.
4 If you did not hear the beep after releasing your finger from the button, repeat the procedure.