Skip to main content

How to test the different Check'In models?

  • Updated

If you own a Check'In or a Check'In 2

Design sans titre (8).png Design sans titre (7).png

1  Step outside the secured area and close the door. Wait one minute (this is the delay period during which the Check'In detection is paused).

2  Knock firmly on the door (either 5 slow knocks or 15 quick ones).

3  An audio message will then announce: "Warning, this site is secured, the siren will activate in a few seconds..."

4  Once the audio message ends, the microphone records a 15-second audio clip. The siren then activates for three minutes.

5  At the same time, depending on your preferences, you receive a notification on your smartphone, and/or an SMS, and/or an email. The alert screen in the Check'In mobile app allows you to turn off the siren.

 

Here is a video explaining how to trigger an alert:

 

If you own a Check'In Pro 2 

Design sans titre (6).png Design sans titre (9).png

To test the detection of suspicious vibrations, refer to the instructions above ⬆️. To test motion detection, follow these steps:

1  Close the door to the secured area, but stay inside. Make sure you are in a location where the motion detector cannot see you (for example, go to another room). 

💡 If you cannot see the motion detector, it means it cannot see you either!

2  Wait for the delay period. By default, the delay period is 15 minutes, but it can be adjusted between 0 and 90 minutes. If you wish to change it, please contact our customer support.

3  Walk past the Check'In Pro 2.

4  An audio message will then announce: "Warning, this site is secured, the siren will activate in a few seconds..."

5  Once the audio message ends, the microphone records a 15-second audio clip. The siren then activates for three minutes.

6  At the same time, depending on your preferences, you receive a notification on your smartphone, and/or an SMS, and/or an email. The alert screen in the Check'In mobile app allows you to turn off the siren.

Related articles